Coldshop Hire
The following equipment is available for hire to trained artists in the Coldshop:
Spatzier cutting lathes x 2 with
- Range of tapered and flanged spindles
- Range of sintered diamond wheels
Spatzier engraving lathes x 2 with
- Range of tapered and flanged spindles
- Range of Felt wheels
Steinert polisher / punty grinder with horse hair wheel and felt wheel attachments and variable speed motor
Merker vertical linisher (belt grinder)
Bremner vertical linisher (belt grinder)
2 x Steinert 36" flat bed grinder, With variable speed motor
Suhner Rotomax with
- Dedicated wet area with 360 degree access
- Hydraulic adjustable height work table
- Variable speed adjustment
- Talm 2:1 right angle attachment
- 10mm and 12mm flexible shaft
- Backing plates for diamond pads
Suhner wet air angle grinder
Pneumatic angle grinder
NSK air engravers with
- 2.35mm and 3mm chucks
- Dedicated engraving tables
- Dedicated pressurised warm water feed
- Ergonomic adjustable stools
Husquvarna diamond saw
- Accepts 300mm - 450mm blades
- Dedicated 450mm 'Merker' continuous rim glass blade
- 400mm masonry blade
- 300mm continuous rim glass blade
- Blade tilts to 45 degrees
Core drill with
- Range of continuous rim diamond bits 5mm - 32mm
- Water fed chuck
- Adjustable hydraulic table and articulated head to be manufactured once open
Large sandblaster with
- Pressure pot
- Reverse pulse dust collection
- 1500mm w x 1200 d x 1100 h internal dimensions
- 8mm tungsten nozzle
Large Champion air compressor that creates 82 L/s or 174 CFM at 7.8 bar (115psi)
Large workstations and sinks to accommodate all forms of glass. All sinks have paddle taps and overhead flexible spray nozzles
All water in coldshop is heated to 26 Degrees C and is pressurized to maintain a constant uninterrupted pressure to each machine
Contact us for rates on 02 6260 7005 or by email contactus@canberraglassworks.com
LINKS
